Copyright © 2008-2019  Pionmi Innovation & Technology (Guangzhou) Co., Ltd. 粤ICP备13070476号   Powered by:www.300.cn      guangzhou.300.cn

PRODUCTS

ABOUT US

Welcome to call
020 - 8109 8862

Hotline:020 - 3203 7248

Room 1404-1406, Building C4, Grand Tech Park, No.28 Kai Tai 

Avenue, Huangpu District, Guangzhou, China.

Follow our QR Code

Wechat

NEWS

PRODUCTS

>
>
>
SANODYE GLODEN ORANGE RLW

Product

SANODYE GLODEN ORANGE RLW

Sanodye® Golden Orange RLW          Homogeneous, water soluble dyestuff for the adsorptive dyeing of anodised aluminium.    The main applications for Sanodye® Golden Orange RLW are:     · In
没有此类产品
Details

Sanodye® Golden Orange RLW 
 
 
 
 
Homogeneous, water soluble dyestuff for the adsorptive dyeing of anodised aluminium. 
 
The main applications for Sanodye® Golden Orange RLW are:  
 
· Indoor 
· Jewellery 
 
Only recommended for interior use. 

1. Dye-specific Data 
 
Commercial form: fine granules 
Chemical character: Azo-dyestuff, unmetallized 
Bulking volume: 700 g/l 
Solubility in water: 100 g/l at 20°C 
Storage stability: practically unlimited, in closed original containers   
Ecotoxicological data: see safety data sheet.  
 
 
2. Application conditions  
 
Concentration, dyeing temperature and time 
 
 Concentration Dyeing temperature Dyeing time 
Bright shades 0.05 - 0.2 g/l 25 - 60°C 10 - 20 min 
Medium shades 0.3 - 0.8 g/l 25 - 60°C 10 - 20 min 
Dark shades 1.0 - 3.0 g/l 25 - 60°C 20 - 40 min 
 
pH-value: 6,0 +/- 0,5 
Water quality: preferably deionised 
Sealing: preferably with Anodal® ASL(one or two stage sealing). 
 
 
3. Setting the Dyebath 
 
When setting the dyebath, care must be taken that the dyestuff is well dissolved.   
Dissolve the dye preferably with hot water (80°C) in a separate container (approx. 5 parts water 
to 1 part dye). Then this mother solution will be added to the dyebath while stirring. 
 
 
4. Lightfastness: 
 
dark dyeings (12  µm): Note  5-6  (ISO 2135). 
 
5. Special remarks
- The dyestuff dyes very extensively. 
 
- Unsealed dyeings can be stripped with nitric acid. 
 
- Prevention of mould formation : 
  An addition of an antimicrobial product can inhibit mould formation for a long time.  
  We recommend the addition of Nipacide CI 15 (See Technical Information) 25 – 50 mg/l. 
 6. Disposal of the dyebaths 
 
Spent dyebaths can be readily precipitated with Anodal® WT-1 Liquid. The method is 
described in detail in the Technical Information bulletin for Anodal® WT-1 Liquid. 
 
The table below shows the additions required for precipitating Sanodye® Golden Orange RLW. 
 
Precipitation FeCl, 40% Etching lye Anodal
® WT-1 Residual dye    
method 
3
ml/g dye ml/g dye ml/g dye Liquid in the filtrate mg/l 
A 5,0 - 0,6 ~ 8 
B 5,0 - 0,6 ~ 5 
C - 5,0 1.2 ~ 5 
 
 
 

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article