Copyright © 2008-2019 Pionmi Innovation & Technology (Guangzhou) Co., Ltd. 粤ICP备13070476号 Powered by:www.300.cn guangzhou.300.cn
PRODUCTS
ABOUT US
Welcome to call
020 - 8109 8862
Hotline:020 - 3203 7248
Room 1404-1406, Building C4, Grand Tech Park, No.28 Kai Tai
Avenue, Huangpu District, Guangzhou, China.
Follow our QR Code
NEWS
PRODUCTS
Product
PNS RED PS-1004
Details
Type: Acid Dye
Model: PNS RED PS-1004
Property:This is the water-soluble acid dye applicable for anodizing absorptive dyeing. The dyed surface will turn to red but partially yellow, offering the excellent fastness to heat. It can be only used indoors and does not suggest to be strongly air- stirred and filtrated during the
process. It is necessary to add the anti-mildew agent to the new dye as they will be mildewed under some certain conditions.
Storage condition: The dye should be sealed up and stored in the dry place.
Working condition:
Concentration | 0.2~5 g/L |
pH | 5.0~6.0 |
Temperature | 25~50°C |
Buffering agent | Adding Dye Buffer PL-BS |
Water quality | Running water (Pure water is recommended) |
Sealing | Sealing salt exclusively sold by Pionmi is recommended. |
Bath make-up:
The dye should be dissolved thoroughly before dyeing bath make-up.
Dissolving the dye with the hot water (over 80℃, dye:water =1:30) in an isolated container as the master solution and then pour it into water tank by stirring to make up dyeing bath to the suitable concentration.
Color fastness to light: Average. The dye is applicable on the indoor products.
Color fastness to heat: Good.
Explanation: Continuous filtration is necessary during the process of using.
Disposal for waste dyeing solution: The waste dyeing solution can be precipitated by Dyeing Wastewater Precipitator PD, the guideline of which is explained in details in the technical information of Dyeing Wastewater Precipitator PD. Please contact us for enquiry if necessary.
Previous article
Next article