Type：

Anodizing Assistant

Model：

AST

Introduction：

AST is a treatment agent for dipping the work piece after sealing. It

is convenient and easy to use. It has a range of functions as below:

50. The UV resistance of the product is enhanced after treatment.
50. The acid and alkali resistance of the product is enhanced after treatment.
50. The salt spray resistance of the product is enhanced after treatment.
50. Suitable for the post-treatment of sealing containing nickel or without nickel.
50. No deterioration of the sealed surface by the post-treatment.

Physical property:

Working condition：

Control method:

1. The concentration of AST will not change greatly in normal use, and will basically only be taken out with the work pieces. Therefore, it is not necessary to adjust the concentration in use, just use the solution with the same concentration to supplement after the liquid level is reduced. If the pH is lower than 10.5, add the original solution to adjust the pH value.

2. The work piece should be cleaned with water as soon as possible after they are removed from AST, otherwise there may be traces on their surfaces.
3. It is recommended to dry for 20 minutes above 80°C to enhance the effect after cleaning.

Operation precautions:

It is recommended to wear protective equipment when using this product, including safety gloves, masks and eyeglasses.