PNE RED PK 600 (Red)

Water-soluble dye suitable for aluminum anodizing adsorption dyeing. Produces red color, recommended for indoor use only. The dye has good heat fastness, but since the dye may develop mold under certain specific conditions, a mildew inhibitor should be added to newly opened dye solutions.

Classification:

PNE

Tag:

online message

Product Details

Name Type

Color Pink

Model/Specification

PNE RED PK 600 (Red)

FeaturesApplicable for water-soluble dyes for aluminum anodizing adsorption dyeing. Produces red color,

recommended for indoor use only.This dye has excellent heat fastness,due to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.Usage conditionsConcentration～gdue to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.

per


L Value	0.2Temperature5°C/Buffer agent
pH Add	5.0Temperature6.0
pH stabilizer Value	25Temperature50Water
Quality	Tap waterPL-BS(
preferably use pure water Seal	HolesIt is recommended to useBai'anmei company's special sealing agent)
Bath solution preparation When preparing the bath solution, it must be fully dissolved.	It is best to use hot water in a separate containerabove 80°C

Dye

=1:30It is recommended to useDissolvethen add the mother liquor to the bath solution while stirring continuously.～Light fastness, suitable for indoor productspreferably use pure waterHeat fastness)Solubility～(60due to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.

°C

ConcentrationNotedue to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.

During use, continuous filtration is required.

Concentrationdue to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.

Disposal of waste dyeing solutionWaste dyeing solution can be precipitated usingdyeing wastewater precipitant)

60°C/Buffer agentdue to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.

LiquidThis method is described in detail in the technical data for dyeing wastewater precipitants.

If needed, please inquire by letter or phone.

Packaging

and storagekgPD It is recommended to usecans, stored in)a cool, dry warehouse, avoid～direct sunlight,PD It is recommended to usecans, stored in)high temperature and heat, and must be sealed properly after use.～若有需要请来函来电查询due to the possibility of mold growth under certain specific conditions, a mildew inhibitor should be added to new dye solutions.