Desmutting Agent AL-D30

Classification:

Auxiliaries for Anodizing

Tag:

online message

Product Details

Name Type

Oxidation Aid

Model/Specification

AL-D30

SpecialProperty

Aluminum Stain RemoverAL-D30is used to remove stains from the surface of aluminum or aluminum alloys after roughening or chemical polishing, which can enhance the effectiveness of subsequent processes.It has excellent stain removal effects, better than ordinary sulfuric acid and nitric acid stain removers, and has a longer lifespan.

but is not suitable for some high-silicon alloys such as cast aluminum.It will not damage the surface of aluminum or aluminum alloys.Usage ConditionsRangeIt has excellent stain removal effects, better than ordinary sulfuric acid and nitric acid stain removers, and has a longer lifespan.
Optimal ValueIt has excellent stain removal effects, better than ordinary sulfuric acid and nitric acid stain removers, and has a longer lifespan.

Milliliters

	Liters Temperature	°C
AL-D30	70-150Time/Seconds	100Time/Seconds
Tank Body	10-30Plastic Inner Layer or	25Plastic Inner Layer or
Acid-Resistant Tank Process Flow:	10-60De-oiling	30De-oiling
(AL-CLEAN DA5 or Special Degreaser	MC)PVC→

Washing

Roughening or Chemical Polishing(AL-ENorPC-25AL-CP2) Stain Removal(AL-D30)Anodizing(AL-D30)Note:After stain removal, it must be thoroughly washed.It is a strongly acidic liquid, and protective clothing and gloves should be worn during operation. If it accidentally comes into contact with skin, rinse with plenty of water.If the stain removal speed is slow and the concentration is within the normal range, check the pH value of the solution. If it is above(AL-D30)Anodizing(AL-D30)adjust the pH value with nitric acid to below.Packaging(AL-D30)Anodizing(AL-D30)and Storage

Kilograms

Barrel, liquid form, stored in a cool, dry warehouse, avoid direct sunlight, high temperature, and heat, and must be sealed properly after use.
AL-D30Precautions
Does not contain any chelating agents, and can be filtered to remove sludge-like substances after neutralization.AL-D30的浓度在正常范围内，则需检查溶液的pH值，若高于1.0时，请用硝酸来调整pH值至1.0以下。