Products
+
  • 脱水剂-Rinse-Aid.jpg

Rinse-Aid

Classification:

Auxiliaries for Anodizing

Tag:

Contact Us
online message

Product Details

Name     Title

ElectroplatingAdditive

Model/Specification

Rinse-Aid

SpecialProperty

Dehydrating agentRinse-AidCan reduce the occurrence of water stains on plated parts, as water has good solubility for many substances. This leads to the disadvantage of impurities easily mixing into the water. After cleaning and drying the plated parts, the impurities contained in the water will adhere to the surface of the plated parts and form water stains. To reduce the occurrence of this situation, the following measures should be taken:

  1. The final cleaning water for the plated parts must use high-purity water to reduce the impurity content in the water..
  2. Add dehydrating agent to the final cleaning water for the plated parts,Rinse-Aidso that the amount of water adhering to the surface before drying is as little as possible, reducing the chance of water stains..
  3. Has a strong dehydrating effect, greatly shortening drying time and saving energy.
  4. This product is non-corrosive.1%The solution is neutral and has no adverse effects on bronze and silver plating.
  5. This product is suitable for dehydrating treatment after electroplating of any metal.

Usage conditions

 

 

Dehydrating agentRinse-Aid

10-20Milliliters/Liters

Temperature Degree

Room temperature-50℃

Time Seconds

3-5Cylinder

Body material,  

PVCor stainless steelPPPackaging

 

and storageKilograms

25Barrel, liquid form, stored in/a cool, dry warehouse, direct sunlight is strictly prohibited,high temperature and heat, must be sealed properly after use.PrecautionsThe dehydrating solution is best prepared with deionized water, and at a minimum, qualified tap water should be used.

Before entering the dehydrating tank, the plated parts should be thoroughly washed in a flowing water wash tank.
  1. When opening and supplementing the dehydrating agent, place the dehydrating agent to be added into a small bucket, then add pure water..
  2. (.
  3. or tank liquid)Stir and dissolve it before adding it to the tank to avoid poor mixing if added directly to the tank, which may cause adverse consequences.The dehydrating agent tank liquid should be replaced based on usage conditions.将其搅拌溶解后才加入槽中，以免直接加入槽中因搅拌不匀而附在槽壁上造成不良后果.
  4. 脱水剂槽液应该根据使用状况，确定更换时间.
图片名称
所属分类：

Auxiliaries for Anodizing

Online Messages

Submit Message

* Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible