Products
+
  • 铝化学抛光添加剂-AL-CP2(1723706315591).jpg

AL-CP2

Classification:

Auxiliaries for Anodizing

Tag:

Contact Us
online message

Product Details

Name     Type

Oxidation Additive

Model/Specification

AL-CP2

SpecialProperty
  1. Aluminum Chemical Polishing Additive AL-CP2Stable performance, easy to operate.
  2. The brightness of treated aluminum or aluminum alloy is excellent, especially suitable for products with high brightness requirements.
  3. Reduces the release pollution of nitrogen oxides.
  4. High solution stability, low production cost.

Usage Conditions

 

Range  Standard

Concentration of Phosphoric Acid  93%-95%

(

Volume Ratio)94%Concentration of Nitric Acid

5-7%)94%Concentration of Nitric Acid

6%

Grams)94%Concentration of Nitric Acid

Liter)94%Concentration of Nitric Acid

AL-CP2

3-8Ratio/Weight

3-8Ratio/Weight

Temperature  ℃

1.64-1.71

1.68

Time  Seconds

95-110Minutes

100Minutes

Stir  Mix

30Swing-3Cylinder Material

Stainless Steel  SUS 316L

Process Flow

Aluminum or Aluminum Alloy

Mechanical Grinding→

 

 

De-oiling )De-oiling PowderConcentration of Nitric AcidAL-CLEAN DA5

,or Special DegreaserMC))Sandblasting(AL-EN)Stain Removal and Film RemovalPC-25Stain RemoverAL-D30)or Special DegreaserChemical Polishing(AL-CP2)or Special DegreaserAnodizing)Sulfuric AcidDyeingor Special DegreaserSealingHigh-Temperature Sealing Agentor Special DegreaserAnodizing)Sulfuric AcidDyeingor Special Degreaseror Room Temperature Sealing Agent)PLS)Concentration of Nitric Acidor Special DegreaserHot Pure Water Rinseor Special DegreaserDrying)Supplement Method:SH-900Phosphoric acid can adjust the specific gravityAfter determining the amount of phosphoric acid to be supplemented, nitric acid should also be added according to the ratio of the tank opening.or Special DegreaserWhen the total amount of added phosphoric acid and nitric acid isor Special Degreaser, polishing agent

AL-CP2 3-8

  1. ,
  2. the amount to be added should be determined based on the actual production situation.
  3. This ratio continues accordingly. And add1Weightthe powder to the required phosphoric acid and nitric acid, stir to dissolve before adding to the polishing tank.PackagingRatio/Weightand Storage)KilogramsConcentration of Nitric AcidBoxes orAL-CP2Barrels, stored in a cool and dry warehouse, avoid direct sunlight, high temperature, and heat, must be sealed after use.

PrecautionsNeed to swing during operation

10Stain removal and film removal are required before and after polishing./Remove excess moisture before polishing.25Stain removal and film removal are required before and after polishing./This additive can be used in the following three forms:

Triacid Type
  1. 50%-90%
  2. 5-20%
  3. Concentrated Sulfuric Acid

 

5-30%

  1. Features: Low production cost, good stability, but higher solution temperature and more smoke generation.

Usage Conditions

Range  Standard

 

(

Diacid Type)94%Concentration of Nitric Acid

 

6%

93%)94%Concentration of Nitric Acid

 

7%

5-30%)94%Concentration of Nitric Acid

 

AL-CP2

5-10Ratio/Weight

 

Time  Seconds

95-120Minutes

 

Stir  Mix

30Swing-90Swing

 

特点：生产成本低，稳定性较好，但溶液温度比较高及烟雾产生比较多。

 

 
  1. 二酸型-A

Usage Conditions

Range  Standard

 

(

93%)94%Concentration of Nitric Acid

 

6%

7%)94%Concentration of Nitric Acid

 

AL-CP2

5-10Ratio/Weight

 

Time  Seconds

95-120Minutes

 

Stir  Mix

1-3Cylinder Material

 

Characteristics: The solution temperature is relatively high, producing less smoke, and the polishing effect is quite bright. This is one of the most commonly used methods.

 

 
  1. 二酸型-B

Usage Conditions

Range  Standard

 

(

Diacid Type)94%Concentration of Nitric Acid

 

7%

10-50%)94%Concentration of Nitric Acid

 

AL-CP2

5-10Ratio/Weight

 

Time  Seconds

95-120Minutes

 

Stir  Mix

10Swing-60Swing

 

Characteristics: The solution temperature is relatively highand StorageCan produce a semi-bright effectand StorageThis is a method suitable for precision parts.

 
图片名称
所属分类：

Auxiliaries for Anodizing

Online Messages

Submit Message

* Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible