Cream-White Tone Sand Finishing AL-EE

Classification:

Sand Finishing

Tag:

online message

Product Details

Name Type

White Sanding Agent

Model/Specification

AL-EE

SpecialProperties

ThroughMilky White Sanding AgentAL-EEThe treated aluminum or aluminum alloy surface can produce an aesthetically pleasing milky white effect..

By simple immersion treatment, a milky white effect can be achieved..
No irritating smoke or harmful gases are produced..
Can remove scratches and roll marks from the substrate surface..
The solution is stable, and the surface treatment effect is uniform..

Usage Conditions

AL-EE	150-300g/L
Temperature 18-30°C	Time
Minutes Process Flow:	1-5Degreasing

→

CleaningAcid EtchingTreatmentAcid EtchingWater WashingAcid EtchingAL-EEAnodizingAcid EtchingDegreasing:Acid EtchingWater WashingAcid EtchingDegreasing:Acid EtchingIt is recommended to use solvent degreasing or neutral degreasing. If alkaline degreasing is performed, it must be fully neutralized afterward.

Cleaning:After degreasing, cleaning can be done using heating, electrolysis, emulsification, etc., depending on the actual situation.

In the water washing tank, stir the workpiece, and then immerse it in a mixed solution containing 10% nitric acid and 5% hydrofluoric acid.

Seconds.

Water Washing(

When preparing the acid solution, please wear protective gear.)Milky Treatment:After thorough water washing, place it in the solution for treatment at a temperature of °C.Minutes.10-20(During treatment, continuous stirring is required; otherwise, blemishes may occur. If the liquid temperature rises, shorten the immersion time.)Acid Etching:After thorough water washing, immerse in the acid solution for the same duration as the previous step before proceeding to anodizing. The above process can achieve a stable treatment effect.

Packaging

and StorageAL-EEkg18-30pack, stored in a cool and dry warehouse, direct sunlight is strictly prohibited.High temperature and heat, must be sealed properly after use.1-5分钟。(处理时要不断搅动，否则会产生斑痕瑕疵，如液温上升，缩短浸渍时间).