Products
+
  • 铝酸性打沙剂-AP-ALE1(1723705262015).jpg

Acidic Sand Finishing AP-ALE1

Classification:

Sand Finishing

Tag:

Contact Us
online message

Product Details

Name     Type

Sandblasting agent

Model/Specification

AP-ALE1

SpecialProperties

Aluminate sandblasting agentAP-ALE1is a weakly acidic white powder used for sandblasting aluminum and aluminum alloys, free of alkaline reducing agents, which can make treated aluminum parts appear silver or white.Usage conditions

Standard

 

 

 

 

Range  g

L  Temperature

AP-ALE1

10055°C/40-70°C

50-12055°C/40-70°C

Time  minutes

seconds

minutes

hours  Cylinder material

1Acid-resistant lining

30Resin tank-3Processing capacity:

Under standard conditions, one kilogram

can processsquare meters, and insufficient sand can be supplemented.Process flowDegreasing

----

 

 

(AL-CLEAN DA5, or special degreasing agent

MC)AP-ALE1→ 12 Washing AP-ALE1Usage conditions

 

Sandblasting treatment, or special degreasing agent

(AP-ALE1)WashingDAC-8Stain removal (Stain removerAnodizingStain removerSulfuric acidDyeingSealingStain remover(PorStain removerHot pure waterDryingWastewater AL-D40SealingStain removerAnodizingStain removerTreatment:DryingContains fluorides, must be neutralized with calcium oxide or calcium hydroxide before discharge, then transferred to a sedimentation tank for sedimentation, using a coagulant for sedimentation, and finally separated into solid and liquid using a filter pump.SealingStain removerAnodizingStain removerPackagingStain remover(PorStain removerand storagekgHS-5000barrel, stored inPLSSealingStain removerAnodizingStain removera cool, dry warehouse, and direct sunlight is strictly prohibited.Stain removerHigh temperature and heat, must be sealed properly after use.

 

PrecautionsContains fluorides, should not be touched directly with hands, gloves must be worn before use.

AP-ALE1Before treatment, the workpiece must be thoroughly cleaned and degreased.

After treatment, the film must be removed before anodizing.与储存

25公斤/桶，储存于阴凉干燥库房内，严禁阳光直射，高温高热，使用后必须盖好密封。

注意事项
  1. AP-ALE1含有氟化物，不宜直接用手触摸在使用前要戴上手套Usage conditions
  2. AP-ALE1处理前，工件必须经彻底除污及脱脂Usage conditions
  3. AP-ALE1处理后，先要除膜，才能进行阳极氧化Usage conditions
图片名称
所属分类：

Sand Finishing

Online Messages

Submit Message

* Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible