AL-EN

Classification:

Sand Finishing

Tag:

online message

Product Details

Name Type

Sandblasting Agent

Model/Specification

AL-EN

SpecialCharacteristics

Aluminum Alkaline Sandblasting AgentAL-ENSuitable for sandblasting treatment agents for aluminum and its alloy products, can produce a bright white or silver sand surface effect.Usage

Long lifespanLow consumptionMeetsEconomic benefitsPre-treatment before spraying can increase coating adhesion.Can remove mechanical marks and scratches from aluminum parts, sand surface treatment effect is uniform.At low temperature and low concentration treatment, it can produce a fine sandblasting effect. At high temperature and high concentration treatment, the sand particles are coarser.Usage ConditionsOptimal ValuegramsUsage
per literAL-ENSodium HydroxideUsage
TemperatureUsage
40-65°CUsage

55°C


	Minutes Stirring	Air or mechanical stirring
AL-EN	20-100Cylinder Material/Stainless Steel or	30Cylinder Material/Stainless Steel or
Heating Method	20-100Cylinder Material/Stainless Steel or	50Cylinder Material/Stainless Steel or
Stainless Steel Electric Heating Tube or Steam Indirect Heating Production Process	Aluminum and Aluminum Alloys:	Degreasing
(AL-CLEAN DA5 or Special Degreasing Agent MC)	1-10Washing
Sandblasting Treatment (AL-EN)	Stain Removal
Stain Remover	AnodizingPP
Sulfuric Acid	Dyeing

Sealing (PLS orHot Pure WaterDrying

Maintenance of Tank Liquid:When there is insufficient sand, it should be supplemented.Economic benefitsDAC-8 Determine the amount to be added based on actual conditions.Not exceeding30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.Packagingand Storage30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.Kilograms(PLS orPack, stored in AL-D4a cool, dry warehouse, direct sunlight is strictly prohibited.30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.High temperature and heat, must be sealed after use.(PLS orAvoid direct contact with this material, do not inhale mist or vapor from the liquid, contaminated work clothes must be washed before reuse, refer tospecific preventive measures and first aid recommendations.30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.If possible, operate below the minimum limits recommended by local regulatory agencies.30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.封孔(PLS或PHS-5000specific preventive measures and first aid recommendations.30% of the total tank volume.At the same time, add sodium hydroxide in proportion.30% of the total tank volume.热纯水30% of the total tank volume.干燥