|
Name Type
|
Sandblasting Agent
|
|
Model/Specification
|
AL-ESD (A/B)
|
|
CharacteristicsAluminum Acid Sandblasting Agent
|
isa dual-component acidic liquid sandblasting agent.It has low pollution, AL-ESD long lifespan,A/Bgood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.Usage ConditionsAL-ESD (A)AL-ESD (B)TemperatureTimeSuitable MaterialPartsTemperature°Ca dual-component acidic liquid sandblasting agent.SecondsASuitable MaterialBetc.Temperature
|
|
(Note): Our company provides
|
|
|
|
|
|
|
|
Additive No. 1 and
|
Additive No. 2 as raw materials. Mix
|
kilograms of phosphoric acid and
|
kilograms of sulfuric acid, then add
|
liters of Additive No. 1,
|
|
1-6stir well, and then add
|
1stir well, and then add
|
95-120milliliters, mix well to obtain
|
45-90kilograms of the finished product.
|
6063Suitable Material5052The required phosphoric acid concentration is
|
|
|
|
- AL-ESD80% or above, with a specific gravity ofAaround,1°Bé or above.2The required sulfuric acid concentration is1890% or above, with a specific gravity of12°Bé or above.1To prepare1kilograms of phosphoric acid, add2To prepare250kilograms, mix and stir evenly to obtain32the finished product.AL-ESD80% or above, with a specific gravity ofAAccording to product requirements, mix the two liquids in appropriate proportions.For example, when starting the tank,A:B = 6:1,1.65then the ratio for supplementation is57A:B = 3:1.BTank materials: fiberglass, stainless steelSUS 316,A:B = 6:1,1.8and lead tanks.57A:B = 3:1.BDue to the high operating temperature, water will continuously evaporate, and it should be replenished in time.
- AL-ESD80% or above, with a specific gravity ofBIt is about16% of the solution.3To prepare16Keep the working liquid's specific gravity between.32the finished product.AL-ESD80% or above, with a specific gravity ofBThe role of aluminum acid sandblasting agent:
- Adjust gloss, improve the uniformity of the sand surface.ASuitable MaterialBEnhance sand surface effect,
and increase the sand output capability of the solution.Process Flow:Degreasing(AL-CLEAN DA5Temperature
- or→Washing
- Sandblasting Treatmentlong lifespan,(AL-ESD) 5-10Stain RemovalStain Remover1.7-1.720)
- Anodizing AL-ESD long lifespan,A/Bgood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.Sulfuric Acid
- AL-ESD-ADyeingTemperature
- AL-ESD-BSealing(PLSHot Pure WaterDryingTemperature
|
|
Packaging
|
and StorageAdditive No. 1 packaging specification islitersDAC-8good blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.barrel,bottle,barrel,drum.Store in a cool, dry warehouse, and it is strictly prohibited.barrel,bottle,barrel,去渍除膜long lifespan,除渍剂 AL-D40)barrel,bottle,barrel,阳极氧化long lifespan,硫酸good blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.barrel,bottle,barrel,染色barrel,bottle,barrel,封孔( PLSlitersPHS-5000good blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.barrel,bottle,barrel,热纯水barrel,干燥
|
|
包装与储存
|
1号添加剂包装规格为4公升/桶，2号添加剂包装规格为1公升/瓶，3号添加剂包装规格为32the finished product./桶。储存于阴凉干燥库房内，严禁SunlightDirect sunlight, high temperature, must be sealed properly after use.
|
|
Precautions
|
- AL-ESD long lifespan,A/Bgood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.It is an acidic substance and should not be touched with hands; gloves should be worn during use.Temperature
- New槽液 should add an appropriate amount of aluminum ions.long lifespan,About1grams/litergood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.to avoid serrated patterns on the workpiece surface.Temperature
- Excessive moisture can lead to uneven surface effects after treatment, so water washing should be minimized.
to avoid bringing in too much moisture.Temperature
- Additives in the original solution may precipitate, so shake well before use.Temperature
- During immersion treatment, the workpiece should be continuously shaken, and the time in the air after treatment should not exceed.
seconds.20Before treatment, the workpiece must be thoroughly degreased and cleaned, otherwise it may.Temperature
- AL-ESD long lifespan,A/Bgood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.produce spots.
After treatment, the stains and films must be removed before anodizing.Temperature
- AL-ESD long lifespan,A/Bgood blasting effect, easy to operate, and can produce different grain sizes of sand surface by mixing the two liquids in appropriate proportions.The槽液 must be discharged only after passing wastewater treatment.
- 槽液要经废水处理合格后才排放。
|
